Monday, October 19, 2009

Trick Or Treat Bag Tutorial

I made these adorable Trick-or-Treat bags for my kids. These were so easy, I decided to make a tutorial so you could make them for your kids too.

(Oh yah, no commenting on the extremely neat sewing table in the background)



Please keep in mind this is my first tutorial so lets all hope I remember everything. Please read through the entire post and take a look at the pics before starting on this project, just to make sure it all makes since to you.



What you will need



2 different fabrics at least 1/2 yard each.




Cut each fabric into 2 13.5"x14" squares. You will end up with 4 squares total.


And a strap made out of your remaining fabric. (I forgot to take a picture of the fabric cut out before I started sewing so just pretend this has all 4 squares and the strap).


The length and width of your strap will depend on how much fabric you have left over. Mine was 26" Long and 6" wide (before folding). To make your strap take your fabric and fold in half lengthwise and iron to make a crease. Now, fold your raw edges towards the middle(crease) and iron down again. This should leave you with a piece of material 26" long and only 1.5" wide. Sew close to the edge down both sides of your strap (lengthwise). This will close your strap and leave you with 2 visible sew lines. (Personal preference on that. I like to have the contrasting thread showing on my straps.)


So sorry about the strap instructions. I will do better next time.




Okay, now to the bag.



I am using Star fabric and Skeleton Fabric. Remember, 2 squares each fabric design.





Take your first fabric (mine was stars) and pin them right sides together. I only pinned 3 sides together and left the top un-pinned so I would know where NOT to sew. I chose to have the 14" on the top and bottom and the 13.5" as the sides. You can make this either way, depending on how tall or how wide you would like your bag.





Sew 3 sides together using 1/5" seam allowance. Leave top open.


Do this for both fabrics. Now you should have 2 'bags' made. One will be your lining the other will be your outer shell.






Next you are going to take one bag and open it up so that the seam from the bottom and the seam from the side are lined up together forming this triangle. Mark at least 1.5" from the point of the triangle with a fabric pen. Remember, your bag is still inside out at this point.






Now you will sew along the mark you just made on each corner of the bag. Once your line is sewn, you will cut of the top of your triangle. This will give you those 'mitered' corners and allow the bottom of the bag to open up wider and sit a little flatter.






This is what the bottom of your bag (lining and outer shell each) will look like after you have finished your corners.


Next you will take your inner lining and turn it right side out. (My lining is my star fabric). Leave the outer bag inside out for right now.
I find it easier at this step to pin your straps in place. To do this, open up your outer shell (remember it is still turned inside out -fabric on the inside of the bag- at this point.) Then just drop your strap in, making sure it is not twisted, lay it out along the sides of the bag. I just kinda eyeball the middle of the bag on either side and pin in place.
Now you will lay your lining inside your shell. It should layer like this: Inner lining (fabric on outside of bag), Strap, Outer lining (fabric on inside of bag). You fabrics will be facing each other with the strap in the middle.



















Sew the lining and outer shell together using a 1/4" seam allowance. Remember to leave a small opening in the bag so that you can turn it right side out. (My photo shows a pair of scissors in the opening that I left in the bag. )




Now, turn bag right side out thru that opening you just left yourself. Your bag should look like this at this point. I know it looks funny, but this is what it should be.

As you can see, your lining and shell are sewn together with your strap in the middle.
You take your lining and just push it into your shell.








To close this hole,



you will need to topstich around the entire top of the bag.



And then you end up with





I hope that was easy to understand.
The "C" on the front of the bag was just sewn on using a straight stich before I sewed the two pieces togeather. I have 4 little ones, so I added the initial to make sure they don't fight over whose bag is whose.

Thank you.

2 comments:

Lola....L..O..L..A....lo--oh--luh! said...

What a great tutorial! Thanks!
Now I've gotta get busy...got six bags to make!

Abby N Kay Boutique said...

Thank you Lola. You are always a little nervouse your first time around.